將需提取藥材投入提取罐內，按生產工藝加入一定比例的溶媒如水、乙醇、甲醇、丙酮等（根據工藝自行加入）。進行原藥提取，提取溫度可根據實際需要設定。按生產工藝進行提取，待提取結束后，將管道閥門按先后順序打開，把液體抽入濃縮罐進行濃縮。濃縮液溫度設定在需要值，真空度保持在－0.05到－0.09MPA,濃縮時產生的二次蒸汽經過冷凝器與冷卻器變成冷凝液回流至提取罐做新溶劑加入藥里,新溶劑由上而下通過藥材層到提取罐底部,藥材中的可溶性成分溶解于提取罐內溶劑,送至提取罐做新溶劑,形成新溶劑回流提取,直至完全溶出(提取液無色)濃縮繼續進行,直至濃縮成需要的比重藥膏,提取罐內的無色液體可下次復用。